Energy Data and Utility Bill Audit in Bend
MartinAI turns the utility bills behind every building in Bend, Oregon into clean, audited, report-ready data, across electricity, gas, water, steam, and more.
Every building in Bend generates a steady stream of utility bills across electricity, natural gas, water, and sometimes steam or district energy. Read one at a time, they are just paper. Assembled, validated, and understood, they are the clearest record of how a building actually performs. Driven by technology and semiconductor manufacturing in the Portland area, along with forestry, agriculture, and outdoor recreation. As a city in the United States, Bend has its own utilities, regulator, and reporting rules, and this page covers what that means for your data.
The energy picture in Bend
| Grid carbon intensity | about 165.6 g CO2e/kWh (2023) |
|---|---|
| Grid mix | Hydro-led, with gas and wind (hydro 43%, gas 38%, wind 15%) |
| Main electricity utilities | Portland General Electric (PGE), Pacific Power (PacifiCorp), Idaho Power, and Eugene Water & Electric Board (EWEB, municipal) |
| Main gas utilities | NW Natural, Avista, and Cascade Natural Gas |
| Energy regulator | Oregon Public Utility Commission |
Bend draws from the Oregon grid, so its electricity carbon intensity reflects that grid. At about 165.6 grams of CO2e per kilowatt-hour (2023: https://www.epa.gov/system/files/documents/2025-06/summary_tables_rev2.pdf)), electricity here carries a middling carbon intensity. Both electricity and fuel reductions move the number, which makes accurate, commodity-by-commodity data the difference between a defensible emissions figure and a guess.
On the ground in Bend
- Electricity is delivered locally by Pacific Power, within the Oregon Public Utility Commission framework.
Getting your utility data in Bend
Portland General Electric and Pacific Power offer online energy-use data and Green Button download, and PGE supports building-level data for benchmarking and reporting (https://www.greenbuttondata.org/).
What MartinAI delivers in Bend
Whether a building is served by Portland General Electric (PGE), Pacific Power (PacifiCorp), and Idaho Power, or any other provider, the bills arrive in different formats and units. MartinAI reads them all, normalizes units and billing periods, flags estimated reads and gaps, and produces a consistent record you can compare across sites and months.
Data delivery
Every utility bill read across electricity, gas, water, steam, and fuels, normalized to consistent units and periods.
Bill audit
Rate class, demand, tax, and meter mapping checked against the tariff and the meter to recover overcharges.
Benchmarking
Clean records that feed ENERGY STAR Portfolio Manager and internal intensity comparisons across sites.
Emissions reporting
Consumption paired with the right local emission factor for defensible Scope 1 and Scope 2 numbers.
Utility bill audit in Bend
Utility bills carry errors more often than most teams expect. Independent figures put billing mistakes at 2.5 to 10 percent of spend and estimate that 15 to 20 percent of invoices contain errors. A bill audit in Bend means checking rate classes, demand charges, tax treatment, and meter mapping against what the tariff and the meter actually say, then recovering what was overpaid.
Reporting and compliance in Oregon
Oregon adopted a statewide Building Performance Standard under House Bill 3409 (2023), administered by the Oregon Department of Energy for large commercial and multifamily buildings over 35,000 square feet, with the program effective in 2025 and phased compliance deadlines beginning in 2028. Portland separately requires annual commercial energy performance reporting for buildings 20,000 square feet and larger.
- 1EPA eGRID2023 Summary Tables
- 2U.S. Census Bureau Vintage 2024 population estimates
- 3Oregon Department of Energy, Building Performance Standard
- 4Oregon Public Utility Commission
- 5City of Portland Commercial Building Energy Reporting
Grid, utility, and program details change over time. Confirm the current local rule before you rely on it.
Frequently asked questions
Can MartinAI handle utility bills from Bend and Oregon?
Yes. MartinAI reads utility bills across every commodity (electricity, natural gas, water, steam, and fuels) and every layout used by utilities in Oregon, then validates each figure. Local formats and multi-meter accounts are exactly what it is built for.
What is the grid carbon intensity in Bend?
Grid electricity in Bend, which sits on the Oregon grid, is about 165.6 grams of CO2e per kilowatt-hour (2023). MartinAI pairs your validated consumption with the right local emission factor so your Scope 2 numbers are accurate.
Do you help with energy reporting rules in Oregon?
Oregon adopted a statewide Building Performance Standard under House Bill 3409 (2023), administered by the Oregon Department of Energy for large commercial and multifamily buildings over 35,000 square feet, with the program effective in 2025 and phased compliance deadlines beginning in 2028. Portland separately requires annual commercial energy performance reporting for buildings 20,000 square feet and larger. MartinAI produces the clean, traceable data those reports depend on.
How is this different from reading bills by hand?
Manual entry is slow and error prone, and the errors flow straight into your cost and emissions numbers. MartinAI reads and validates automatically, flags anomalies, and keeps every figure traceable back to the source bill, so the data holds up under an audit.