Energy Data and Utility Bill Audit in Gillette
MartinAI turns the utility bills behind every building in Gillette, Wyoming into clean, audited, report-ready data, across electricity, gas, water, steam, and more.
Managing energy in Gillette starts with the data buried in utility bills, and that data is messier than it looks: different formats, different units, estimated reads, and charges that hide real consumption. An economy dominated by mineral extraction such as coal, natural gas, oil, and trona, alongside wind energy, tourism, and agriculture. Getting it clean is the work that everything else depends on. As a city in the United States, Gillette has its own utilities, regulator, and reporting rules, and this page covers what that means for your data.
The energy picture in Gillette
| Grid carbon intensity | about 831.6 g CO2e/kWh (2023) |
|---|---|
| Grid mix | Coal-dominant with growing wind (coal 71%, wind 20%) |
| Main electricity utilities | Rocky Mountain Power (PacifiCorp), Cheyenne Light, Fuel & Power (Black Hills Energy), Black Hills Power (Black Hills Energy), High Plains Power, and Powder River Energy Corporation |
| Main gas utilities | Black Hills Energy and Enbridge Gas Wyoming (formerly Dominion Energy Wyoming / Questar Gas) |
| Energy regulator | Wyoming Public Service Commission |
Gillette draws from the Wyoming grid, so its electricity carbon intensity reflects that grid. At about 831.6 grams of CO2e per kilowatt-hour (2023: https://www.epa.gov/system/files/documents/2025-06/summary_tables_rev2.pdf)), electricity here is among the more carbon-intensive in the United States. Every kilowatt-hour avoided delivers a large emissions saving, so accurate consumption data and demand management pay off directly in both cost and carbon.
On the ground in Gillette
- Electricity is delivered locally by Rocky Mountain Power, within the Wyoming Public Service Commission framework.
Getting your utility data in Gillette
No Wyoming utility has a confirmed Green Button offering, and the state has no utility data-access mandate; customers view usage through Rocky Mountain Power and Black Hills Energy online accounts (https://psc.wyo.gov/).
What MartinAI delivers in Gillette
Whether a building is served by Rocky Mountain Power (PacifiCorp), Cheyenne Light, Fuel & Power (Black Hills Energy), and Black Hills Power (Black Hills Energy), or any other provider, MartinAI reads its utility bills across every commodity and layout, separates true consumption from delivery, demand, and tax lines, and validates each figure before it reaches a report. The result is one clean record per building that you can analyze, benchmark, and hand to an auditor.
Data delivery
Every utility bill read across electricity, gas, water, steam, and fuels, normalized to consistent units and periods.
Bill audit
Rate class, demand, tax, and meter mapping checked against the tariff and the meter to recover overcharges.
Benchmarking
Clean records that feed ENERGY STAR Portfolio Manager and internal intensity comparisons across sites.
Emissions reporting
Consumption paired with the right local emission factor for defensible Scope 1 and Scope 2 numbers.
Utility bill audit in Gillette
An audit is where clean data pays for itself. With every bill in Gillette read and validated, the anomalies surface: a wrong rate class, a demand charge inflated by one bad interval, tax applied where it should not be, consumption billed to the wrong meter. Industry figures put utility billing errors at 2.5 to 10 percent of spend, so the recovery is often material.
Reporting and compliance in Wyoming
None yet. Wyoming has no statewide building performance standard or benchmarking law, and no city benchmarking ordinance is on record.
- 1Wyoming Public Service Commission
- 2IMT U.S. building benchmarking policy map
- 3U.S. Census QuickFacts, Wyoming
- 4EPA eGRID2023 Summary Tables
Grid, utility, and program details change over time. Confirm the current local rule before you rely on it.
Frequently asked questions
Can MartinAI handle utility bills from Gillette and Wyoming?
Yes. MartinAI reads utility bills across every commodity (electricity, natural gas, water, steam, and fuels) and every layout used by utilities in Wyoming, then validates each figure. Local formats and multi-meter accounts are exactly what it is built for.
What is the grid carbon intensity in Gillette?
Grid electricity in Gillette, which sits on the Wyoming grid, is about 831.6 grams of CO2e per kilowatt-hour (2023). MartinAI pairs your validated consumption with the right local emission factor so your Scope 2 numbers are accurate.
Do you help with energy reporting rules in Wyoming?
None yet. Wyoming has no statewide building performance standard or benchmarking law, and no city benchmarking ordinance is on record. MartinAI produces the clean, traceable data those reports depend on.
How is this different from reading bills by hand?
Manual entry is slow and error prone, and the errors flow straight into your cost and emissions numbers. MartinAI reads and validates automatically, flags anomalies, and keeps every figure traceable back to the source bill, so the data holds up under an audit.