Energy Data Management and Utility Bill Audit in Maryland
Utility data delivery, bill audit, and emissions reporting for Maryland. From messy bills to structured, validated records you can trust.
Every building in Maryland generates a steady stream of utility bills across electricity, natural gas, water, and sometimes steam or district energy. Read one at a time, they are just paper. Assembled, validated, and understood, they are the clearest record of how a building actually performs. Anchored by federal government activity, biotech and life sciences, cybersecurity, higher education, and the Port of Baltimore. As a state in the United States, Maryland has its own utilities, regulator, and reporting rules, and this page covers what that means for your data.
The energy picture in Maryland
| Grid carbon intensity | about 237 g CO2e/kWh (2023) |
|---|---|
| Grid mix | Mostly natural gas and nuclear, with some coal, hydro, and solar |
| Main electricity utilities | Baltimore Gas and Electric (BGE), Pepco, Delmarva Power, Potomac Edison (FirstEnergy), and Southern Maryland Electric Cooperative (SMECO) |
| Main gas utilities | Baltimore Gas and Electric (BGE), Washington Gas, Columbia Gas of Maryland, and Elkton Gas |
| Energy regulator | Maryland Public Service Commission |
| Population | About 6.2 million (2020 Census) |
At about 237 grams of CO2e per kilowatt-hour (2023), electricity here carries a middling carbon intensity. Both electricity and fuel reductions move the number, which makes accurate, commodity-by-commodity data the difference between a defensible emissions figure and a guess.
Getting your utility data in Maryland
BGE, Pepco, and Delmarva Power offer Green Button Download My Data and Connect My Data so customers and authorized third parties can pull interval usage data (https://www.bge.com/account-billing/my-account/my-energy-use).
What MartinAI delivers in Maryland
Whether a building is served by Baltimore Gas and Electric (BGE), Pepco, and Delmarva Power, or any other provider, MartinAI reads its utility bills across every commodity and layout, separates true consumption from delivery, demand, and tax lines, and validates each figure before it reaches a report. The result is one clean record per building that you can analyze, benchmark, and hand to an auditor.
Data delivery
Every utility bill read across electricity, gas, water, steam, and fuels, normalized to consistent units and periods.
Bill audit
Rate class, demand, tax, and meter mapping checked against the tariff and the meter to recover overcharges.
Benchmarking
Clean records that feed ENERGY STAR Portfolio Manager and internal intensity comparisons across sites.
Emissions reporting
Consumption paired with the right local emission factor for defensible Scope 1 and Scope 2 numbers.
Utility bill audit in Maryland
An audit is where clean data pays for itself. With every bill in Maryland read and validated, the anomalies surface: a wrong rate class, a demand charge inflated by one bad interval, tax applied where it should not be, consumption billed to the wrong meter. Industry figures put utility billing errors at 2.5 to 10 percent of spend, so the recovery is often material.
Reporting and compliance in Maryland
Maryland has a statewide Building Energy Performance Standards program under the Climate Solutions Now Act (COMAR 26.28) covering buildings 35,000 sq ft and larger, with benchmarking that began in 2025 and direct GHG standards starting in 2030 toward net zero by 2040. Montgomery County runs its own BEPS in parallel.
Cities we serve in Maryland
- 1EPA eGRID2023 Summary Tables (State Output Emission Rates)
- 2Maryland MDE Building Energy Performance Standards
- 3Maryland Public Service Commission
Grid, utility, and program details change over time. Confirm the current local rule before you rely on it.
Frequently asked questions
Can MartinAI handle utility bills from Maryland?
Yes. MartinAI reads utility bills across every commodity (electricity, natural gas, water, steam, and fuels) and every layout used by utilities in Maryland, then validates each figure. Local formats and multi-meter accounts are exactly what it is built for.
What is the grid carbon intensity in Maryland?
Grid electricity in Maryland is about 237 grams of CO2e per kilowatt-hour (2023). MartinAI pairs your validated consumption with the right local emission factor so your Scope 2 numbers are accurate.
Do you help with energy reporting rules in Maryland?
Maryland has a statewide Building Energy Performance Standards program under the Climate Solutions Now Act (COMAR 26.28) covering buildings 35,000 sq ft and larger, with benchmarking that began in 2025 and direct GHG standards starting in 2030 toward net zero by 2040. Montgomery County runs its own BEPS in parallel. MartinAI produces the clean, traceable data those reports depend on.
How is this different from reading bills by hand?
Manual entry is slow and error prone, and the errors flow straight into your cost and emissions numbers. MartinAI reads and validates automatically, flags anomalies, and keeps every figure traceable back to the source bill, so the data holds up under an audit.