Energy Data and Utility Bill Audit in Newark
MartinAI turns the utility bills behind every building in Newark, New Jersey into clean, audited, report-ready data, across electricity, gas, water, steam, and more.
Every building in Newark generates a steady stream of utility bills across electricity, natural gas, water, and sometimes steam or district energy. Read one at a time, they are just paper. Assembled, validated, and understood, they are the clearest record of how a building actually performs. Dense commercial, pharmaceutical, logistics, and multifamily sectors make building energy use significant. As a city in the United States, Newark has its own utilities, regulator, and reporting rules, and this page covers what that means for your data.
The energy picture in Newark
| Grid carbon intensity | about 213.3 g CO2e/kWh (2023) |
|---|---|
| Grid mix | Natural gas and nuclear split most generation (gas 52%, nuclear 44%) |
| Main electricity utilities | Public Service Electric and Gas (PSE&G), Jersey Central Power & Light (JCP&L), Atlantic City Electric, and Rockland Electric Company |
| Main gas utilities | Public Service Electric and Gas (PSE&G), New Jersey Natural Gas, South Jersey Gas, and Elizabethtown Gas |
| Energy regulator | New Jersey Board of Public Utilities (NJBPU) |
Newark draws from the New Jersey grid, so its electricity carbon intensity reflects that grid. At about 213.3 grams of CO2e per kilowatt-hour (2023: https://www.epa.gov/system/files/documents/2025-06/summary_tables_rev2.pdf)), electricity here carries a middling carbon intensity. Both electricity and fuel reductions move the number, which makes accurate, commodity-by-commodity data the difference between a defensible emissions figure and a guess.
On the ground in Newark
- Electricity is delivered locally by PSE&G, within the New Jersey Board of Public Utilities (NJBPU) framework.
Getting your utility data in Newark
The NJBPU has advanced AMI data-access standards and PSE&G offers usage data through MyMeter, which supports utility data sharing for building benchmarking (https://nj.myaccount.pseg.com/myservicepublic/smartmeters).
What MartinAI delivers in Newark
Whether a building is served by Public Service Electric and Gas (PSE&G), Jersey Central Power & Light (JCP&L), and Atlantic City Electric, or any other provider, the bills arrive in different formats and units. MartinAI reads them all, normalizes units and billing periods, flags estimated reads and gaps, and produces a consistent record you can compare across sites and months.
Data delivery
Every utility bill read across electricity, gas, water, steam, and fuels, normalized to consistent units and periods.
Bill audit
Rate class, demand, tax, and meter mapping checked against the tariff and the meter to recover overcharges.
Benchmarking
Clean records that feed ENERGY STAR Portfolio Manager and internal intensity comparisons across sites.
Emissions reporting
Consumption paired with the right local emission factor for defensible Scope 1 and Scope 2 numbers.
Utility bill audit in Newark
Utility bills carry errors more often than most teams expect. Independent figures put billing mistakes at 2.5 to 10 percent of spend and estimate that 15 to 20 percent of invoices contain errors. A bill audit in Newark means checking rate classes, demand charges, tax treatment, and meter mapping against what the tariff and the meter actually say, then recovering what was overpaid.
Reporting and compliance in New Jersey
Under the 2018 Clean Energy Act, owners of commercial buildings over 25,000 square feet must benchmark energy and water use annually and report to the NJBPU through EPA ENERGY STAR Portfolio Manager, a requirement in effect since 2023 with annual July deadlines (https://nj.pseg.com/businessandcontractorservices/saveenergyandmoneyforbusiness/benchmarking).
- 1US Census Vintage 2024 state population estimates
- 2New Jersey Board of Public Utilities
- 3PSE&G NJ Energy and Water Benchmarking Program
- 4PSE&G Smart Meters and MyMeter
- 5EPA eGRID2023 Summary Tables
Grid, utility, and program details change over time. Confirm the current local rule before you rely on it.
Frequently asked questions
Can MartinAI handle utility bills from Newark and New Jersey?
Yes. MartinAI reads utility bills across every commodity (electricity, natural gas, water, steam, and fuels) and every layout used by utilities in New Jersey, then validates each figure. Local formats and multi-meter accounts are exactly what it is built for.
What is the grid carbon intensity in Newark?
Grid electricity in Newark, which sits on the New Jersey grid, is about 213.3 grams of CO2e per kilowatt-hour (2023). MartinAI pairs your validated consumption with the right local emission factor so your Scope 2 numbers are accurate.
Do you help with energy reporting rules in New Jersey?
Under the 2018 Clean Energy Act, owners of commercial buildings over 25,000 square feet must benchmark energy and water use annually and report to the NJBPU through EPA ENERGY STAR Portfolio Manager, a requirement in effect since 2023 with annual July deadlines. MartinAI produces the clean, traceable data those reports depend on.
How is this different from reading bills by hand?
Manual entry is slow and error prone, and the errors flow straight into your cost and emissions numbers. MartinAI reads and validates automatically, flags anomalies, and keeps every figure traceable back to the source bill, so the data holds up under an audit.